海綿復合機火焰復合機械

海綿復合機 火焰復合機械
1、采用海綿本體作粘合材料，經過火焰噴射使之熔化與其它材料粘合，亦可將其它兩種材料利用海綿燃燒熔化后粘合起來，尤其適合毛絨、麂皮絨的復合，具有整體性強、手感好、耐水洗、干洗等優點。
2、配有放卷、送料、自動對邊裝置，適合大批量生產；恒張力懸掛式冷卻系統使復合的品質更有保障。

基本參數
電源380V
放卷直徑800（mm）
復合層數2（層）
復合寬度160（mm）
機械速度4~35m/min
收卷直徑800（mm）
外形尺寸5250(B)╳600(L)╳1600(H)（mm）
重量3800（kg）
總功率50（Kw）
加工定制 是

24小時在線 ：398855697 購買各種復合機械請到江蘇鑫利龍來瞧瞧！
如果還在擔心機器的質量？我們每年生產銷售幾百臺的機器設備、不到1％的維修率給您信心！
如果還在擔心機器的性能？我們全部電子配件承諾、特的輥筒壓紋機防護技術給您保障！
如果還在擔心機器的售后服務？我們每款機器出廠前要經過您的試樣才能夠出廠 ！我們的售后承諾：一年保修，終身維護，定期提示保養
如果還在猶豫機器的價格？那么我希望您可以明白“一分錢一分貨”的真理。低端配置復合機不僅不，而且在復合機方面也沒有保障！
復合機價格區間由經濟型到智能型5-40萬不等?？傆幸豢钸m合您用的。為您量身訂制，打造出為您創造財富的不同檔次的機器。

Operators can operate the equipment only after they are fully familiar with the performance and working principle of the machine. The equipment must be operated by a special person, and non-operator can not be disorderly opened and disturbed.
Before production, electrical appliances such as cables, circuit breakers, contactors and motors should be inspected to meet the requirements.
Before production, it is necessary to check whether the three-phase power supply is balanced or not, and startup equipment without phase is strictly prohibited.
During the production period, it should check whether the rotary joints are safe, whether the pipeline is smooth, whether there is any damage, oil leakage, and timely removal.
The hot oil engine must be turned on before production, and can be produced only after the temperature is raised to the required temperature of the process. Before production, check whether the pressure of each barometer is normal, whether there is air leakage in the air passage, and repair it in time.
Before production, check the fastening condition of each joint, loosen or fall off, and repair it in time.
Before large-scale production of equipment, small-scale test should be done before large-scale production can be achieved.
Before production, the lubrication conditions of hydraulic stations, reducers, bearing bushes, screw, etc. should be checked, and the hydraulic oil and lubricating oil should be injected correctly and timely.
After shutdown, the rubber trough and scraper accessories, mesh rollers must be cleaned in time to remove residual glue and dirt from all parts of the machine for next use.