拉伸強力提升劑HOLPOSON?StrengthBoost

拉伸強力提升劑
HOLPOSON? Strength Boost

拉伸強力提升劑HOLPOSON?Strength Boost 適用于棉、粘膠、滌綸、化纖及其混紡織物，可以有效減少織物之間的摩擦，提高織物斷裂強力及化纖織物斷裂強力，根據面料及用量的不同，可以適當提升30%-左右的拉伸斷裂強力，同時兼具良好的順滑手感。
一、物化性能
外觀?? 乳白色液體
離子型 弱陽離子型
pH 近中性
溶解性 易溶于水
二、使用方法
本產品適用于各種印染加工設備
.浸軋法
HOLPOSON?Strength Boost 30-40g/l，100-130℃定型
.浸漬法
HOLPOSON?Strength Boost 2-4%，浴比1:10，30分鐘脫水烘干（100-130℃）

貯 存
1.避免陽光直射，密閉保存在室內通風處（0-35℃下保存），使用后記得及時封口
避免出現結塊現象。
2.產品為弱陽離子型，與其他離子型合用前，請預先做相容性實驗確認。
3.不可將其置于陽光暴曬處或其他高濕高熱處。

Tensile Stength Improver
HOLPOSON? Strength Boost

It is suitable for cotton, viscose, polyester, chemical fiber and their blends. It can effectively reduce the friction between fabrics, improve the breaking strength of fabrics and chemical fiber fabrics. According to the different fabrics and dosage, most of them can increase the tensile breaking strength by about 30% - , and have a good smooth hand feel.

Physical & chemical properties:
Appearance: Milky white liquid
Ionicity: Weak cationic
pH: Near neutral
Solubility: Soluble in water

Usage:
This product is suitable for all kinds of dyeing equipment.
Padding method
HOLPOSON?Strength Boost: 30-40g/L, heat setting at 100-130 ℃
Impregnation method
HOLPOSON?Strength Boost: 2-4%, bath ratio 1:10, 30 minutes of dehydration and drying (100-130℃)


Storage:
1. Avoid direct sunlight, store in a indoor ventilated place (0-35 ℃), and remember to seal in time after use to avoid caking.
2. The product is of weak cationic type. Please confirm the compatibility through test in advance before mix-using it with agent of other ionicity.
3. Do not place it in the blazing sun or other places with high humidity and heat.