HID-SX250射吸式抽泥船，裝配式清淤船

射吸式抽沙船簡介General Introduction
?該船適用在封閉少浪的近海和內陸河流湖泊施工。
?This cutter suction dredger is designed to operate in sheltered inshore waters.
?是利用強水流使泥沙泛起再讓泥沙泵吸走的原理。
?To use strong water flow to shot sand up and suck away by pump.
?安裝行走的螺旋槳，移動工作方便。
?Easily mobilize the ship by special propeller.
?前邊橋架扇形吸泥作業，達到要求的深度即可前進。
?Anchor back of dredger to positioning and dredger ladder with cutter swingby sector fan-shaped.
?參考ZC 標準設計，按照企業標準生產。
?Build under enterprise standard with reference to ZC standard，China.
?全船為焊接鋼結構。底板10mm, 側板和甲板為6mm.；四個壓載水艙位于側附體前后兩端。
?She is of all welded steel construction ,bottom plate 10 mm thickness and shell plating 6 mm thickness, 2 double bollards(fwd and aft) and 1 single bollard in the center on each side.
?整船可拆裝，可裝入集裝箱，適用于鐵路和公路運輸。
?The whole dredger is dismountable in road transportable sections.
?發動機和泵位于中間主機艙，兩邊的側船體作為燃油艙，壓載艙和儲物倉。
?The engines and dredge pump are located in the center pontoon, the 2 side pontoons serve as fuel bunkers, ballast tanks and store.
?主機艙為水密艙。
?Engine room and pump section are accessible by watertight hatches
?為抽沙船駕駛員設計的寬敞明亮的操作室。全室周圍向外觀察無死角， 配備空調和可調節座椅，工作環境舒適。一名駕駛員操作所有監控儀表，燈光控制按鈕和動作指令按鈕。</a></a></a>