食品紙盒自動封盒機C-60D餅干糕點盒自動打碼熱熔膠封盒機

（一）性能用途：
1. 適合一切需要上膠、封盒的紙盒包裝，例如：餅干、食品、藥品、紙巾盒等包裝紙盒封口；
2. 人工裝好物料放至輸送帶，機械自動上膠、封口，大小規格可調節；
3. 機器使用膠量大約是手工封盒膠的1/3，膠水使用量極少；
4. 整機采用不銹鋼和鋁合金材料，符合食品級標準；
5. 底部裝有腳輪，輕松移動；
6. 在線自動打印生產日期。
（1）Main features:
1. It is suitable for all carton packaging that needs to be glued and sealed, such as sealing of biscuits, food, medicine, tissue boxes, etc.;
2. Filling by manual.Automatic delivery ,gluing and sealing. The size and specification can be adjusted;
3. The amount of glue used by the machine is about 1/3 of that of manual sealing box glue, and the amount of glue used is very small;
4. The whole machine is made of stainless steel and aluminum alloy, meeting food grade standards;
5. The bottom is equipped with casters for easy movement;
6. Equipped with date core machine.

(二)使用方法：
1. 接通電源，設備的線路安全通暢；
2. 打開電源開關，機器開始自動加熱（設定180℃）；
3. 根據不同熱熔膠來設定封盒機加熱溫度，待膠完全熔化；
4. 按下啟動鍵，接通氣源；
5. 打開輸送帶開關，放置裝好產品的紙盒到封盒機導入槽；
6. 自動輸送，封盒機開始自動完成涂膠折蓋送出成品。
（2）Usage:
1. First, switch on the power supply to ensure the equipment's line safety and unobstructed;
2. open the power switch, the machine began to automatic heating set (180 ℃);
3. Set the heating temperature of the box sealing machine according to different hot melt adhesive, and wait for complete melting;
4. Press the start button to connect the air source;
5. Open the switch of the conveyor belt, and put the carton packed with products into the import slot of the box sealing machine;
6. Automatic transmission; the sealing machine starts to automatically complete the gluing and folding cover and send the finished products.


（三）產品質量：
一．材質采用不銹鋼鋁材型，精美；全部是AOD精煉爐生產的不銹鋼，不會出現生銹，褐色現象。
二．三道關口，出廠產品；
（1）安裝好，經過檢驗員細心檢測。
（2）檢驗好，經過開機檢查。
（3）出廠前，再次進行打樣檢查。
（3）Product quality assurance:
1.The material is made of stainless steel aluminum, fine and durable.All the stainless steel produced by AOD refining furnace is guaranteed not to rust and brown.
2.Three passes pass, guarantee factory product absolute high quality durable;
(1) after installation, it must be carefully tested by the inspector.
(2) the inspection is good, and it must be started up.
(3) conduct sample making inspection again before delivery


（四）參數Parameters：
C-60D 半自動高溫熱熔膠封盒機
電源：220V/50H
氣壓：0.4Mpa
總功率：1.2Kw
包裝范圍（L*W*H）：(100-280)*(50-200)*（30-100）mm
生產速度：60 盒/分鐘
工作溫度：180-200°C
膠槽容量：1.5Kg
機器尺寸（L*W*H）：1800*800*1500mm
機器重量：220Kg
C-60D Semi-automatic Hot Melt Glue Box Packing Machine
Power：220V/50HZ
Pressure：0.4Mpa
Total power：1.2Kw
Range of packing size（L*W*H）：(100-280)*(50-200)*30-100mm
Speed：60 boxes/min
Working temperature：180-200°C
Glue tank capacity：1.5Kg
The machine size（L*W*H）：1800*800*1500mm
Weight：220Kg