泉州紙盒自動封盒機C-110B餅干糕點巧克力盒熱熔膠高速粘盒機

（一）性能用途：
1. 適合一切需要上膠、封盒的紙盒包裝。例如：餅干、食品、藥品、紙巾盒等包裝紙盒封口；
2. 人工裝好物料放至輸送帶，機械自動上膠、封口.
3. 機器使用膠量大約是手工封盒膠的1/3，膠水使用量極少；
4. 整機采用不銹鋼和鋁合金材料，符合食品級標準；
5. 底部裝有腳輪，輕松移動；
6. 觸摸屏控制自動調節規格，無任何經驗者都可在短時間熟悉使用。
（1）Main features:
1. Suitable for all carton packing that needs to be glued and sealed. For example: biscuits, food, medicine, tissue boxes and other packaging carton sealing;
2. Put the materials into the conveyor belt after finishing by people and work, automatically glue and seal on the machine;
3. The amount of glue used by the machine is about 1/3 of that of manual sealing box glue, and the amount of glue used is very small;
4. The whole machine is made of stainless steel and aluminum alloy, meeting food grade standards;
5. Casters are installed at the bottom to move easily;
6. Touch screen control automatically adjusts the specifications;those without any experience can be familiar with the use in a short time.


（二）使用方法：
1. 安裝入盒輸送帶；
2. 安裝尾部出料成品紙盒倒立輪盤；
3. 打開電源開關，用觸摸屏數控調節生產盒子尺寸（進入指引界面）；
4. 膠輪（點動調試、當盒子走到膠槽位置再靈活定位膠輪）；
5. 將熱熔膠放入膠槽，根據不同熱熔膠來設定封盒機加熱溫度，待膠完全熔化；
6. 接通氣源，按下啟動鍵；
7. 放置裝好產品的紙盒到封盒機輸送帶；
8. 自動輸送，封盒機開始自動完成涂膠折蓋送出成品。
(2)Usage:
1. install the conveyor belt into the box;
2. install the inverted rotary disc of the paper box of the finished product discharged from the tail;
3. turn on the power switch and adjust the size of the production box with the touch screen numerical control (enter the guide interface);
4. set the rubber wheel at a fixed point (point and adjust, position the rubber wheel flexibly when the box goes to the position of the rubber groove);
5. put the hot melt adhesive into the glue tank set the heating temperature of the box sealing machine according to different hot melt adhesive, and wait for the glue to melt completely;
6. turn on the gas source and press the start button;
7. place the carton packed with products into the conveyor belt of the box sealing machine;
8. automatic transmission;the sealing machine starts to automatically complete the gluing and folding cover to send the finished products.


（三）產品質量：
一．材質采用不銹鋼鋁材型，精美；全部是精煉爐生產的不銹鋼，不會出現生銹，褐色現象。
二．三道關口，出廠產品；
（1）安裝好，經過檢驗員細心檢測。
（2）檢驗好，經過開機檢查。
（3）出廠前，再次進行打樣檢查。
（3）Product quality assurance:
1. The material is made of stainless steel aluminum, fine and durable.All the stainless steel produced by AOD refining furnace is guaranteed not to rust and brown.
2. Three passes pass, guarantee factory product absolute high quality durable;
(1) after installation, it must be carefully tested by the inspector.
(2) the inspection is good, and it must be started up.
(3) conduct sample making inspection again before delivery.


（四）參數Parameters：
C-110B 半自動高溫熱熔膠封盒機
電源：220V/50H
氣壓：0.4Mpa
總功率：2.4Kw
包裝范圍（L*W*H）：(100-280)*(50-250)*（30-100）mm
生產速度：90-110盒/分鐘
工作溫度：180-200°C
膠槽容量：1.5Kg
機器尺寸（L*W*H）：4200*800*1500mm
機器重量：350Kg
C-110B Semi-automatic Hot Melt Glue Box Packing Machine With Air Cleaner
Power：220V/50H
Pressure：0.4Mpa
Total power：2.4Kw
Range of packing size（L*W*H）：(100-280)*(50-250)*（30-100）mm
Speed：90-110 boxes/min
Working temperature：180-200°C
Glue tank capacity：1.5Kg
The machine size（L*W*H）：4200*800*1500mm
Weight：350Kg